ANSYS/LS-DYNA Memory Error

[peglor]

Can someone help with the following error message for ANSYS/LS-DYNA?

Bearing in mind that: I have 1GB of memory. I increased it yesterday from 512MB and the error message has not changed. I have also tried changing the memory settings, reducing the database memory and increasing the total memory. Still the exact same message. Also, the environment variable LSTC_MEMORY=auto has been set. Model size is 120,000 Nodes.

ERROR MESSAGE:
....
expanding memory to 6397052
expanding memory to 6406179
expanding memory to 7545100
contracting memory to 7305224
expanding memory to 8446934
expanding memory to 10302676

*** Error Memory is set 1802676 words short
increase the memory size.
Current memory size 8500000
...

Number of CPU's 1
Start time 08/23/2004 12:07:30
End time 08/23/2004 12:07:51
Elapsed time 21 seconds ( 0 hours 0 minutes 21 seconds)

E r r o r t e r m i n a t i o n
...

Thanks