Jun 3, 2010 #1 femboy Mechanical Mar 11, 2009 29 Hello. How does I make contact between beam and face in Ansys WB? Thank you.
Jun 3, 2010 #2 chris9 Automotive Feb 18, 2004 142 You could attach solid elements to the beam in the area of contact and use normal contact elements. You can do this in ANSYS classic. Chris http://www.value-design-consulting.co.uk Upvote 0 Downvote
You could attach solid elements to the beam in the area of contact and use normal contact elements. You can do this in ANSYS classic. Chris http://www.value-design-consulting.co.uk
Jun 4, 2010 #3 ansysfreak Civil/Environmental Feb 27, 2005 167 This can be done with using the MPC methode in the contact settings. Upvote 0 Downvote
Jun 4, 2010 Thread starter #4 femboy Mechanical Mar 11, 2009 29 I tried MPC, but I can't select beam as contact. Do you know any command example for beam to surface contact. Thank you. Upvote 0 Downvote
I tried MPC, but I can't select beam as contact. Do you know any command example for beam to surface contact. Thank you.
