aouf
Automotive
- Feb 21, 2015
- 1
hello , can any one heklp me to correct this errors
PS: i am using ansys workbench in my simulaton and i already have one element in meshing .
please answer me , thnaks in advance
the error:
An internal solution magnitude limit was exceeded. Please check your Environment for inappropriate load values or insufficient supports. Also check that your mesh has more than 1 element in at least 2 directions if solid brick elements are present.
PS: i am using ansys workbench in my simulaton and i already have one element in meshing .
please answer me , thnaks in advance
the error:
An internal solution magnitude limit was exceeded. Please check your Environment for inappropriate load values or insufficient supports. Also check that your mesh has more than 1 element in at least 2 directions if solid brick elements are present.