Anyone know of a product like this?

[ryandias]

I am searching for a screw terminal that would bind two plates together. Something like a "lug terminal" but.. basically as in the attached image.

The inner width should be about 1/4".

Anyone know of such a product?

Green & Red are the two plates.
Grey is sort of an extrusion with threaded hole
Black is the screw

 

[itsmoked]

Search for a "Cage Clamp".
And search for a "Split Bolt".
Google.

See if one of those is what you desire.

Keith Cress
Flamin Systems, Inc.-

http://www.flaminsystems.com

 

[VEBill]

Looks roughly like what's on my Square-D circuit breakers where the black wire attaches.

 

[TurboXS]

Scroll down this web page for some pictures;

http://www.dinkle.com/_english/02_products/02_products_01.html

Does this help?

 

[ryandias]

A "cage clamp" would be great, but seems to be part of other Items. I just want the clamps.

The pictures from Dingle are great. The two on the left and right are IDEAL! But again are part of their terminal blocks. I just want the Clamps :-(

Anyone else have any ideas? Suppliers?

 

[Mike2468]

Thomas and Betts, Amp/Tyco, Burndy, Panduit.

Look at the lug connectors for large wires such as 2 AWG. You get a screw, a cage clamp, and maybe one other piece. Just use the screw and cage clamp.

Lots of sizes and variety.

 

[TurboXS]

Not quite what you describe but maybe they can tell you someone who does;

http://www.keyelco.com/products/sprod10.asp?CategoryID=9

 

[mjl2023]

You might try try Ilsco, we use similar parts from them.

http://ebusiness.ilsco.com/webapp/w...reId=10001&langId=-1&catalogId=1&categoryId=2

 

[davesaudio]

they were common hardware store items back in the day,before kitchen stoves shipped with integrated cordsets.