Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 602 vs API 600

Status
Not open for further replies.

Joe2221

Mechanical
Jul 28, 2020
2
Hello,

I have an application where a client has both API 602/600 gate valves in their specification. It seems as though most valve manufacturers prefer to offer forged gate valves per API 602 when size is below 2" NPS. What should I be comparing when considering whether a small bore gate valve be designed per API 602 or API 600? This is H2S service and valves must be meet NACE requirements.

TIA.
 
Replies continue below

Recommended for you

Go with API602 if you can. Forged valves (API602) are almost always better than cast valves (API600), everything else being equal. Go with Trim #5 NACE-certified for H2S service.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor