Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Apply Displacement then Coupling Constraint

Status
Not open for further replies.

OptiEng

Mechanical
Joined
Oct 30, 2009
Messages
149
Location
GB
Hello all,

I have two components in contact,

STEP 1: I would like to apply a displacment to a suface on component 1 to allow this to contact with component 2.

STEP 2: I am then trying to slide one component other the other by applying a rotation to component 1. I tried created a coupling but found that I could not apply this coupling to the 2nd step alone.

I have uploaded a picture at called "Model_Image".

Any advice/tips on how I can move forward with this? Thanks.
 
Is the coupling between the protrusion and RP-1? If so why not just have the coupling in STEP 1 and 2? I hope this helps.


Rob Stupplebeen
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top