RFreund
Structural
- Aug 14, 2010
- 1,885
Referance ASCE 7-10 Fig 30.4-1 (Same in ASCE 7-05 but different section)
The GCp for wall components and cladding may be reduced by 10% if the roof slope is less than 10deg. Does this mean for a GCp of say 0.7 would be 0.7-(0.1*0.7)=0.63 as opposed to 0.7-0.1=0.6 ?
Thanks in Advance
EIT
The GCp for wall components and cladding may be reduced by 10% if the roof slope is less than 10deg. Does this mean for a GCp of say 0.7 would be 0.7-(0.1*0.7)=0.63 as opposed to 0.7-0.1=0.6 ?
Thanks in Advance
EIT