jbesson
Petroleum
- Feb 13, 2008
- 25
Hi engineers,
A quick one, t=PR/SE-0.6P to calculate thk under internal pressure (circumferential stress).
Why ASME doesn't combine this circumferential stress with the longitudinal stress generated by the end load which is around 1/2 the circumferential stress ?
A quick one, t=PR/SE-0.6P to calculate thk under internal pressure (circumferential stress).
Why ASME doesn't combine this circumferential stress with the longitudinal stress generated by the end load which is around 1/2 the circumferential stress ?