Sep 6, 2012 #1 PVG1 Mechanical Sep 6, 2012 10 Using carbon steel for a Sect. VIII Div 1, pressure vessel. Wondering if the slab number has to be recorded and kept?
Using carbon steel for a Sect. VIII Div 1, pressure vessel. Wondering if the slab number has to be recorded and kept?
Sep 6, 2012 #2 metengr Materials Oct 2, 2003 15,478 No, unless it is the only means of traceability to the original heat number. Upvote 0 Downvote
Sep 6, 2012 #3 stanweld Materials May 9, 2003 2,906 When plate lot testing is a requirement of the SA specification, the heat chemistry and individual plate number(s) tensile tests will also be required. Upvote 0 Downvote
When plate lot testing is a requirement of the SA specification, the heat chemistry and individual plate number(s) tensile tests will also be required.
Sep 7, 2012 Thread starter #4 PVG1 Mechanical Sep 6, 2012 10 Thanks guys, much appreciated. Upvote 0 Downvote
