ASME Y14.5m-2009

[looslib]

What are the plans for NX to include the new Dimensioning & Tolerancing spec (Y14.5m-2009)? Is there a targeted release for the development work?

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[JohnRBaker]

This is the official position from our Drafting Product Manager:

With the recent release of the ASME Y14.5-2009 Standard we understand that many customers will begin to review and consider adopting the changes that have been introduced. Siemens PLM is confident that the standards coverage we provide today in NX will continue to provide customers with the standards compliancy they need to get their job done. Work is underway to determine changes that need to be made to satisfy this latest update. We welcome input from those customers who have assessed how the new standard will impact their business requirements. Your feedback will help us to determine and set priorities.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[cindytaylor]

John,
I have a list of ASME Y14.5M -2009 symbols from our GD&T group that they would like to see addressed in future NX versions. Who/where should I submit these too.

Regards, Cindy

 

[SDETERS]

Would these changes Fall under ER request you Can submit to the PLM world Website and or GTAC?

Thanks

 

[ewh]

I would think that "Work is underway to determine changes that need to be made to satisfy this latest update" would cover that, but it never hurts to submit a request.

"Good to know you got shoes to wear when you find the floor." - [small]Robert Hunter[/small]

 

[JohnRBaker]

Send them to me along with any comments that you have and I'll forward it to the Product Manager for that project.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[cindytaylor]

Thanks John,

From the ASME Y14.5-2009 book...

pg. 42 Fig. 3-11 Modifying Symbols
Translation
Continuous Feature
Square
All Over

pg. 43 Fig. 3-16
Spotface Symbol

pg. 64 Fig. 4-19
Translation Modifier

pg. 84 Fig. 4-46
Customized Datum Reference Frame

pg. 85 Fig. 4-47
Movable Datums

pg. 140 Fig. 7-45
Three Segment Composite Tolerance

Cindy

 

[JohnRBaker]

I've forwarded your information to the appropriate Product Manager, but he would like some sort of contact information so that he can follow-up if needed. I know you can't post an email address or phone number but if you could at least give us some idea of where you work that might be sufficient for now.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[cindytaylor]

International Truck - Navistar

 

[JohnRBaker]

Out of Fort Wayne?

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[cindytaylor]

yes