Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Asphalt Recycling

Status
Not open for further replies.

echrispy

Materials
Jan 18, 2006
2
Im an undergrad Materials Engineer working on an asphalt recycling project.

Anyone who is interested in asphalt recycling is invited to visit our forum:



We have three goals of the project:

To optimize a current process with minor changes.

To redesign a current process with major changes.

To develop a new process.


If you are interested in asphalt recycling we would like to hear from you.
 
Replies continue below

Recommended for you

I got a "Formu does not exist" error - please check your link, etc.

------------------------------------------
"...students of traffic are beginning to realize the false economy of mechanically controlled traffic, and hand work by trained officers will again prevail."

Wm. Phelps Eno, ca. 1928
 
echrispy:

Are you aware of what California DOT did recently on Interstate 80?

You might find this article interesting:


The article says the contract called for milling out 4" of existing asphalt then replacing it with dense graded asphalt concrete, and capping that with 3 more inches of dense graded. They then changed the original plan and substituted recycled material in that same 4" section using a cold in place recycling process (using 2.5% foamed asphalt, 1.5% cement as a binder, and with no additional fines).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor