Assembling body to body

[REnright]

I am assembling a body to a body. Haven't had any trouble till lately. When I assemble,,,it makes a copy of the body, hides it, yet assembles it too. When you look in the tree,,the assemble appears to be empty. The body becomes united to the main body,,, and I have a copy that is placed in NO SHOW. Just curious what step I am missing. Thank You

 

[DBezaire]

Ryan, it sounds like you are in Hybrid design mode. Check tools-options-infrastructure-part infrastructure- part document.

Regards,
Derek

 

[DBezaire]

Actually this could may be assembling a hybrid body to a non hybrid. If you want to eliminate this from your model you could use copy/paste as result. If I remember correctly the with link option will not change the solid type.

Regards,
Derek

 

[REnright]

OK,,thanks guys. So what is the proper way to start a file WITHOUT hybrid? I know it is under tools,, options. I thought I had already done this.

 

[catiajim]

Have your system administrator turn Hybrid Modelling off for everone

If you get the "start part" window popping up, just uncheck Enable Hybrid Modelling. If not, TOOLS, OPTIONS, INFRASTRUCTURE, PART INFRASTRUCTURE, Part Document, and Uncheck Enable Hybrid Modelling