Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Assembly Constraints Solver Veeeeery Slow

Thread starter daluigi
Start date Nov 9, 2010

Status: Not open for further replies.

Nov 9, 2010

daluigi

Industrial

We've moved from NX4 to NX6 to find out that adding/constraining components into an assembly using the new assembly constraints is incredibly slow when compared to the old mating conditions.
It seems that NX6 now updates many things in between each component inserted via constraints...
Any experience/solutions to share overthere on that matter ? I see a lot of GTAC IR already posted whithout any workaround and or scheduled solutions ahead...