Assembly Create New Part Error

[CCD429]

Hi all,

Just got this error for the first time in NX 10 (Windows 7 SP1 64 bit). I've been using it for months and never seen this before.

All i was trying to do was create a new part from within an assembly, I've done this before many times.

Has anyone seen this error before? Any ideas on how to prevent it?

Thanks,

Chris

 

[CCD429]

.... and now it stopped responding

 

[Toost]

According to this message, NX tries to open a file on your system, but cannot find the file.
Can you check if that named file exists on your system ?
Can you check if you can open it ? ( File - Open... from NX )

Sometimes running software becomes "corrupted", then starting a new session might be the simple solution.


Regards,
Tomas

 

[CCD429]

 

[CCD429]

Thanks Tomas

Can you check if that named file exists on your system ?

Yes, it's there.

Can you check if you can open it ? ( File - Open... from NX )

Yes, it just opened fine, but took a few extra moments..

I'm just going to get back to work for now, fingers crossed this doesn't become frequent.

 

[SDETERS]

Look at the end of your log file. File Help Log file. Is there anything in it that gives a idea what is going on. If not GTAC may be able to help out also.

 

[CCD429]

hmm, nothing jumps out at me, i searched for the template file..


Log file:

https://www.dropbox.com/s/wnta710awc3u74i/log file.txt?dl=0

 

[Toost]

This logfile looks ok. It's not the one from the crash you had.
If I was you i would update the NX install, you are running 10.0.0. NX10.0.2 is available for download since a quite a while now.
It contains bugfixes for "NX10". And the enhanced dimensioning


Regards,
Tomas

 

[CCD429]

Tomas, thanks for the heads up. I will have to ask our account manager for the login info. Is this the correct download link?

 

[JohnRBaker]

It appears to be, but posting that link could prove to be a bit awkward since if you have a valid Webkey ID and, like MY system, it prompts you to enter it, it will immediately start downloading a multi-gigabyte zip file if you do :-0

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.