Assembly Navigator

[Amar005]

Hello All,

We have an assembly with 20 subassemblies and total 250 parts.We have to modify some parts.
We are facing problems for searching particular part.
Can anyone knows-
How to perform part search in assembly navigator?
Please suggest.

Have a nice day.
Regards,
Amar Halake

 

[jerry1423]

assemblies (pull-down) > content control > find component
or in the ANT:
rmc (right mose click) in the grey space near "descriptive part name" > find selected components

 

[daluigi]

Or select a component > right-click on the ANAV header zone > 'Expand To Selected'

 

[JonSelby]

ALso the other way round, If you can see a part on screen but can't find it in the assembly navigator ...

* Right click in a blank area of the assembly navigator.
* Select "Find Selected Components"
* Pick the parts you can see.
The assy navigator will automatically expand the contents so you can see your part.

Hopefully useful.
Jon

 

[NXMold]

I have a toolbar above my assy navigator with the buttons "Expand to Selected" and "Expand to Work" refering to selected part and work part. Like JonSelby pointed out, its a quick way to get to a part that you can see and select in the graphic window.

NX 7.5.0.32 MoldWizard

 

[Amar005]

Hi,

Thanks all.
Have a nice day.


Regards,
Amar Halake