Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM D5080

Status
Not open for further replies.

BigH

Geotechnical
Dec 1, 2002
6,012
Friends - anyone have any experience with the above spec for compaction control? Also covered by AS 1289.5.7.1 (Stds from OZ).
 
Replies continue below

Recommended for you

BigH...we were using a similar method before it became a standard, but only for checking trench backfill to get equivalence to in situ density of the sidewalls.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor