Attaching images to 3D model in NX

[Nani-789]

Hi,
I wanted to know if there is a possibility to attach different images to 3D models in NX. If it is possible, is there a way to map the normal flat images to curved models. I tried using raster images but i couldnt exactly attach them to 3d model.

 

[jerry1423]

It looks like there is, and below is a link to a former post, but not very good at explaining it. It appears there is something on YouTube, but I did not check it out.

https://www.eng-tips.com/viewthread.cfm?qid=136060

Jerry J.
UGV5-NX1884

 

[cowski]

There is a "decal" command in NX, but I've never really used it. As mentioned by jerry1423, youtube may be helpful.

www.nxjournaling.com

 

[Nani-789]

Thank you guys for your responses. But the point is, i have already used the 2 methods i.e raster images and decal stickers. In raster images , the images can be placed and adjusted but it can be fixed or projected on CAD model and in decal sticker, the image attcaches as a sticker to the CAD model. So i am searching for some other better way to process it. I have attached pictures so you can have a look.[URL unfurl="true"]https://res.cloudinary.com/engineering-com/image/upload/v1578579278/tips/raster_image_d9vudq.tiff[/url]

 

[jerry1423]

Possibly this previous post will help you out.

https://www.eng-tips.com/viewthread.cfm?qid=286524

Jerry J.
UGV5-NX1884

 

[SDETERS]

In The New NX 1899 you can do some fun things, But it turns your model into a Convergent model. This may have been introduced in 1872. Maybe this will help you out a bit. I think it takes a special license also. just a thought.

https://docs.plm.automation.siemens...ndex_whatsnew:id1241822:xid1749454:xid1749276

https://docs.plm.automation.siemens.com/tdoc/nx/1899/nx_help#uid:xid1656902