Authorized inspector

[cmsvessel]

Can somebody give some ideas about the possible questions that will be asked during the interview for pressure vessel AI?

 

[JoeTank]

I would guess that you would get a bunch of questions from ASME I, VIII, V, IX, etc.

Steve Braune
Tank Industry Consultants

http://www.tankindustry.com

 

[Swig]

cmsmeng,

you get some math questions (30), and a lot (70) of multiple choice questions about Sect I, IV, V, VIII, IX and NIBC

Swig

 

[lostsailor]

cmseng,
Are you interviewing for an AI position or preparing to take the National Board examination?
Regards,
RLS

 

[GenB]

If you do not have an idea you can be in a lot of trouble,
not knowing the NBIC and ASME Codes a little mean you are not ready for an exam/interview
you may have to take the AI Nat'l Board class.
genb

 

[aclark]

if you are planning in taking the National Board Exam the the next one will be given on the 1st and 2nd of March. Then again in June on the 7th and 8th.

If you are intrested in a class go here:

http://ccs.goivytech.net/boiler_pressure/contact_manager.html

I am one of the instructors for the class.

 

[deanc]

https://www.nationalboard.org/nationalboard/Default.aspx

Try here---The Inspectors Corner.

Then only if you have a strong desire to learn,lots of patience,like tall tales,and are blessed with thick skin.

 

[cmsvessel]

The interview is for AI position, not the NB exam.