Jun 3, 2013 #1 Jeldon Chemical Joined May 20, 2013 Messages 25 Location BR Hello friends, greetings. I need help. I have a weld metal with base P No. 1, that the throat is 17.0 mm, in accordance with paragraph 331.1.3 (b) (1) of the code ASME B31.3, where the temperature should be used?
Hello friends, greetings. I need help. I have a weld metal with base P No. 1, that the throat is 17.0 mm, in accordance with paragraph 331.1.3 (b) (1) of the code ASME B31.3, where the temperature should be used?
Jun 4, 2013 #2 metengr Materials Joined Oct 2, 2003 Messages 15,478 Location US For a throat of 17mm, you need to look at Table 331.1.1 for P-No 1 base material, the PWHT temperature is 593-649 deg C. Upvote 0 Downvote
For a throat of 17mm, you need to look at Table 331.1.1 for P-No 1 base material, the PWHT temperature is 593-649 deg C.
Jun 4, 2013 #3 wegm Industrial Joined Jun 4, 2013 Messages 61 Location GR It depends on the construction. You could have a look to the below link: http://www.weldinguide.com/gdanastasiadis/viewtopic.php?f=2&t=28 Upvote 0 Downvote
It depends on the construction. You could have a look to the below link: http://www.weldinguide.com/gdanastasiadis/viewtopic.php?f=2&t=28