Nov 15, 2005 #1 mikeg8 Industrial Nov 15, 2005 29 0 0 GB What US standards cover specification of ball valves? Are there international (ISO etc) equivalents?
Nov 15, 2005 1 #2 gsxra Industrial Nov 14, 2005 8 0 0 US Check out ASME B16.34 or ISA S75.04 Upvote 0 Downvote
Nov 15, 2005 Thread starter #3 mikeg8 Industrial Nov 15, 2005 29 0 0 GB Thanks gsxra. I knew of B16.34, but not ISA S75.04: I'll check it out. Upvote 0 Downvote
Nov 15, 2005 #4 Sircrashalot Mechanical Jun 24, 2005 43 0 0 CA API 6D is common in the oil & gas industury. Andy Upvote 0 Downvote
Nov 15, 2005 #5 bcd Mechanical Sep 27, 2002 517 0 0 US Another USA ball valve spec. is MSS SP-110. No ISO equivalent yet. bcd Upvote 0 Downvote
Nov 15, 2005 #6 JimCasey Mechanical Oct 29, 2003 924 0 0 US ANSI ('scuse me: ASME) B16.10 seems to be used frequently for face-to-face. MSS-SP72 NACE MR01-75 API 6D ASME ( I almost did it again) B16.5/B16.34 Upvote 0 Downvote
ANSI ('scuse me: ASME) B16.10 seems to be used frequently for face-to-face. MSS-SP72 NACE MR01-75 API 6D ASME ( I almost did it again) B16.5/B16.34
Nov 15, 2005 #7 SJones Petroleum Apr 22, 2001 3,890 0 36 GB ISO 6002 ISO 10434 ISO 15761 ISO 17292 ISO 14723 (if you are going subsea). Some of these standards will have some equivalency as per API 6D/ISO 14313 for example. Look them up. Steve Jones Materials & Corrosion Engineer http://www.pdo.co.om/pdo/ Upvote 0 Downvote
ISO 6002 ISO 10434 ISO 15761 ISO 17292 ISO 14723 (if you are going subsea). Some of these standards will have some equivalency as per API 6D/ISO 14313 for example. Look them up. Steve Jones Materials & Corrosion Engineer http://www.pdo.co.om/pdo/
Nov 30, 2005 #8 rsv Mechanical Nov 28, 2005 17 0 0 GB API 608 & ASME B16.34 for design - press. temp ratings ASME B16.10 for Dimensional standard API 598 & 607 for Inspection & testing inc. Fire safe When you get to larger sizes / higher press. then there are no Dimensional std. in B16.34. Upvote 0 Downvote
API 608 & ASME B16.34 for design - press. temp ratings ASME B16.10 for Dimensional standard API 598 & 607 for Inspection & testing inc. Fire safe When you get to larger sizes / higher press. then there are no Dimensional std. in B16.34.