Battery simulator 1

[Lucitano]

I am using for testing the quality of brand new battery chargers a battery simulator from Amperis, with this set the charger can inject up to 200 A. I wonder if someone knows a battery simulator that can be injected more current, since the Amperis battery simulator is not prepared for beeing connected in parallel.

 

[ScottyUK]

Do you mean an electronic load? Something like the Torkel series from Programma -

http://www.megger.com/eu/products/ProductDetails.php?ID=2648&Description=

 

[tecnolugo]

The Current selection potentiometer of Amperis battery simulator is from 0 to 200 A.
Scotty UK, How much current can you inject with your solution?

 

[ScottyUK]

At what voltage? The Torkel series has supplementary loading units which add about 15kW for each additional block.

After that you might look at Crestchic, Cressall or Mosebach for very large loading units.

 

[tecnolugo]

The voltage range is between 85-135VCA or 180-250VCA single phase, with the maximum power of 250W, the frequency 50 / 60Hz and the maximum current of 200A
I leave the Amperis Battery Simulator link:
[URL unfurl="true"]http://www.amperis.com/en/products/misc/battery-dischargers/battery-simulators/cbx/[/url]

 

[Lucitano]

I do not know if the Programma unit can test only batteries or besides chargers. I mean a battery charger tester, which is in deed an electronic load.