Bep parameter shown in formula K1-8 for HSS Shear Yielding (Punching) 1

[Szubert80]

Can someone confirm what is Bep parameter shown in AISC Spec. in Table K1.2 (K1-8) for plate-to-HSS connection limit state?
Thank you

 

[wannabeSE]

Have you looked at K1-18 where B[sub]ep[/sub] = 10B[sub]p[/sub]/(B/t) ≤ B[sub]p[/sub]

 

[Szubert80]

Looks like I missed it Thank you