MEturnedEE
Mechanical
- Aug 22, 2018
- 5
Hi there, we are designing a fairly compact PCB for a communications device. We are looking at using BLE as a link for voice to a separate microphone, and BT Classic to be paired with a smartphone. We are using pre-certified modules, and they will located on the PCB about 20mm away from each other (can extend this to 40mm if need be). Is there a risk of interference between the 2? We are transmitting audio in both cases so interference would be particularly noticeably. They both operate at 2.4GHz, but I understand they have different frequency hopping techniques.