Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

boiler blowdown

Status
Not open for further replies.

moussa1985

Petroleum
Oct 8, 2012
1
why boiler blow-down?
 
Replies continue below

Recommended for you

To remove components that will form solids should they accumulate.

Good luck,
Latexman

Need help writing a question or understanding a reply? forum1529
 
The purpose of boiler blowdown is to control the concentration of dissolved salts in the boiler.

The dissolved salts concentrate in the boiler when the boiler water evaporates to steam. The salts do not evaportate with the steam, the salts remain in the boiler water. Without control of the salts, the boiler heat transfer surfaces would eventually scale as the concentration of salts rises to the level of salt precipitation.
 
any build up of material listed above plus scale and sediment.
 
to prevent supersaturation of bad salts in the water. These salts will eventually deposit and scale up plus cause chloride damage, so dump it out.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor