Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bolt insulation solutions 1
- Thread starter pisimatza
- Start date
controlsdude
Electrical
glastic or with nomex, look on web for suppliers
electricpete
Electrical
Out of curiosity, why should the bolts be insulated from the joints?
=====================================
Eng-tips forums: The best place on the web for engineering discussions.
=====================================
Eng-tips forums: The best place on the web for engineering discussions.
- Thread starter
- #4
Maybe my english was bad...
I mean the bolts are connecting the joints(in fish plates, at connections between horizontal busbars ).
Those bolts are not insulated, and the rest of bar is.
Need to insulate also bolts(against accidental touch, etc).
I mean the bolts are connecting the joints(in fish plates, at connections between horizontal busbars ).
Those bolts are not insulated, and the rest of bar is.
Need to insulate also bolts(against accidental touch, etc).
-
1
- #5
PVC boots can be used. See
- Thread starter
- #6
- Status
Similar threads
- Question
- Question
- Locked
- Question