Bolt Tensioning procedure

[hassmx0f]

Dear All

I have XYZ bolt tensioning Machine and ABC bolt tensioning machine. Can the procedure approved for ABC machine be used on XYZ machine?

 

[LittleInch]

No

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[hassmx0f]

i would be glad if you woulad be able to tell me what could be the efeect and why it can not be used?
Thanks

 

[LittleInch]

See my tag line. How is anyone going to be able to do this with no information??

You say procedure for ABC machine is "approved" for that machine. So why do you think it can be used for a different machine?

If you actually give us some details and provide some specific issues then you might get somewhere.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[hassmx0f]

Procedures of both the machines are approved. One machine say ABC(vendor) is approved with 4 sockets and the other(vendor) with 50 % sockets. So my concern here is the procedure which is approved with 4 sockets(tensioning values apllied are of the 4 sockets vendor) can be applied for the machine procedure which is approved with 50% sockets.Please note the values given by both the vendors are differnt.I hope i am not sounding confused


If not can you please give me the reference