AK92
Geotechnical
- Aug 20, 2013
- 45
Hi,
I am designing foundations for a structure using bored micropiles which extend to the rock about 30m deep. The borehole log showed hard residual soils right at the top with significant softening at around 10m depth (from N>100 blows to N=5) which continued up to the rock. We suspected that it was a clay infill in a calcareous rock formation, and when we tested the rock, the carbonate content was 12%. It doesn't help that there are hydrochloric acid tanks situated right at the site, and the pH of soil samples near the surface are about 3.5. Since acid reacts readily with carbonate, I can only assume that there is a risk of the rock around the pile getting corroded by the acid as the boring might create flow pathways to the rock.
What precautions should I be taking when designing these foundations?
I am designing foundations for a structure using bored micropiles which extend to the rock about 30m deep. The borehole log showed hard residual soils right at the top with significant softening at around 10m depth (from N>100 blows to N=5) which continued up to the rock. We suspected that it was a clay infill in a calcareous rock formation, and when we tested the rock, the carbonate content was 12%. It doesn't help that there are hydrochloric acid tanks situated right at the site, and the pH of soil samples near the surface are about 3.5. Since acid reacts readily with carbonate, I can only assume that there is a risk of the rock around the pile getting corroded by the acid as the boring might create flow pathways to the rock.
What precautions should I be taking when designing these foundations?