Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BOTTLE DESIGN 1

Status
Not open for further replies.
Replies continue below

Recommended for you

Hi Marina
More Info would be helpful...
Why is a revolved feature not appropriate???
What are you trying to do with the bottle???


------
Cheers
Steve Griffiths :)
Andromeda Industries - Advanced Engineering Division
 
I WANT TO DESIGN A BOTTLE THAT IS NOT ROUND. THE BASE IS RECTANGLE AND THE TOP IS ELLIPSE.
I DONT HAVE A FOTO TO ATTACH.
SO I NEED A SAMPLE PART OF A BOTTLE DESIGNED WITH SURFASES TO GET AN IDEA HOW TO DESIGN IT.

THANKS
 
Hi Marina,

Bottle for :
1° - fragrance
2° - alccol
3° - etc...

Want you the collar?

Please don't use the "capital letters"...

Best regards
 
you may want to check some of the websites that have downloads of solid models of various things, maybe even check with a bottle manufacturing company.
 
Hi Smermet,

sorry for the "capital letters"

The bottle is for detergent

If you have any parts please attach. It might be useful

Best regards
 
This is really a surfacing job and would take more time than one is willing to devote here. It isn't the most difficult thing I've ever encountered but it takes some time to do well and probably involves a certain amount of problem solving along the way.

Best Regards

Hudson

www.jamb.com.au

Nil Desperandum illegitimi non carborundum
 
Here you go have a look at this one I created a while ago.

Best regards

Simon NX4.0.4.2 MP10 - TCEng 9.1.3.6.c - (NX6.0.3.6 MP2 native)


Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away...
 
Status
Not open for further replies.
Back
Top