Broken toolpath when using conical mill cutter. Need help. 1

[Bailar]

%NX6.0.1.5

I have a problem milling part with conical (mill) cutter. I use variable contour method.

Take a look at the picture and attached part below:

large image

 

[joycejo]

Take a look at the file.

I copied the operation and changed the tool axis and the projection vector. The tool path looks OK now.

I changed the tool axis to away from line and used two points to define a line through the center of the part. I set the projection vector to tool axis.





John Joyce
Tata Technologies
1675 Larimer St.
Denver, CO
www.myigetit.com

 

[Bailar]

Joycejo, Youre example realy work.
Thanks for your time.