The lamination sandwiched between a pair of glasses prepared in a room having a window unit air conditioner and a humidifier gives off bubbles after 4 months. The autoclave is in very good condition for the heating process. I anticipate the prep room may require a review. The walls are timber panels and ceiling is of gypsum boards all painted. There is an external door before one reaches to the prep room so that humidity is controlled. Please advice.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bubbles after Lamination of Glass
- Thread starter Riz
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
