Feb 20, 2011 #1 atlim Civil/Environmental Feb 20, 2011 1 what is the required minimum spacing of bundled reinforcing bars for beams?
Feb 21, 2011 #2 NJonesUK Civil/Environmental Oct 1, 2009 23 Between the bundled bars laterally within the beam, between the bundled bars themselves or to the face of the beam? Upvote 0 Downvote
Between the bundled bars laterally within the beam, between the bundled bars themselves or to the face of the beam?
Feb 21, 2011 #3 msquared48 Structural Aug 7, 2007 14,745 Between the bars, not less than: 1. the equivalent diameter of the combined bars; or 2. 1.33 times the maximum aggregate size; or 3. 1" Whichever is greater. Per table "Reinforcement 12", page 151 in the 1971 ACI Design Handbook. Mike McCann MMC Engineering Motto: KISS Motivation: Don't ask Upvote 0 Downvote
Between the bars, not less than: 1. the equivalent diameter of the combined bars; or 2. 1.33 times the maximum aggregate size; or 3. 1" Whichever is greater. Per table "Reinforcement 12", page 151 in the 1971 ACI Design Handbook. Mike McCann MMC Engineering Motto: KISS Motivation: Don't ask
