Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Butterfly valves

Status
Not open for further replies.

hyari

Mechanical
Dec 25, 2014
27
0
0
QA
Hi ,

one of the client asked about double eccentric butterfly valves Duplex SS disk with some additional data and accessories as below ,

1. Density value ( 1.5 kg/cubic m )
2. shut of pressure ( 12 bar )
3. Compressibility (0.09956 )
4. Actuator stroke time ( 300mm per minute ) motor operated
5. mechanical position indicator including position indicator light )
6. Torque switch
7. limit switch
8. Reversing starter
9. Motor overload protection
10.Anti-condensation heater
11.Push-button switch
12.Selector switch


kindly any one one have an experience in above requirements , plz clarify

Ahmad
 
Replies continue below

Recommended for you

Status
Not open for further replies.
Back
Top