Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Butterfly valves

Status
Not open for further replies.

hyari

Mechanical
Dec 25, 2014
27
Hi ,

one of the client asked about double eccentric butterfly valves Duplex SS disk with some additional data and accessories as below ,

1. Density value ( 1.5 kg/cubic m )
2. shut of pressure ( 12 bar )
3. Compressibility (0.09956 )
4. Actuator stroke time ( 300mm per minute ) motor operated
5. mechanical position indicator including position indicator light )
6. Torque switch
7. limit switch
8. Reversing starter
9. Motor overload protection
10.Anti-condensation heater
11.Push-button switch
12.Selector switch


kindly any one one have an experience in above requirements , plz clarify

Ahmad
 
Replies continue below

Recommended for you

The valve is fine. What is important is the application and brand name which have not been mentioned.
 
thank you , but any more clarification regarding above points ?

Ahmad
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor