C360 Half Hard Brass is what is on the print. We got in C36000 Cast and Turned. I was able to find info on C36000 but haven't been able to find anything on C360 Half Hard. Can anyone provide me with the specs on C360 Half Hard?
I have contacted our vendor. (What I should have done in the first place.) He informed me that our part was too large to be half hard and parts this size are 'as cast'. How much does the material properties of brass vary in the 'as cast' state? The info I've gathered isn't too promising; the yield strength for C36000 can vary between 124 and 340 Mpa.