Russellccooper
Geotechnical
I am trying to locate the source of a auger cast pile cage making machine that I saw in use on a site. Any ideas of a supplier/Manifacturer?
Thanks
Thanks
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cage Making Machines?
- Thread starter Russellccooper
- Start date
- Status
jheidt2543
Civil/Environmental
Sorry I don't have any specific information, but just a suggestion. Why not call the contractor that was doing the job? Sometimes these things are proprietary to the contractor, but it is also possible he purchased it and would give you the lead.
The other thought would be to call a number of auger cast pile contractors in your area and ask them.
The other thought would be to call a number of auger cast pile contractors in your area and ask them.
- Thread starter
- #3
Russellccooper
Geotechnical
Unfortunatly the problem with that is that the machine that I worked with before is located in the UK and the company is now not doing business. I have heard rumour of a machine that utilises pullies and chains to space the bars but I have never come across one. Any help with this matter would be greatly apprcieted
dicksewerrat
Civil/Environmental
Call afew of the larger Piling and Foundation Engineers. If its out there some else has seen it. One might be Hayward Baker.
- Status
Similar threads
- Locked
- Question