Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calorific value for hydrocarbons

Status
Not open for further replies.

Emz80s

Chemical
Jun 7, 2020
8
Hi all
I ask why calorific value for ch4 is higher than all the other ( heavier hydrocarbons) like Ethane , propane ... despite all these heavier HC 'a should have more carbon atoms than ch4 !!
 
Replies continue below

Recommended for you

Chemistry.
Write out the reactions, calculate the Free Energy values.
It is a more optimal package.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
I ask about the burning of Ch4
Why gives more heat than burning ethane for example ???
Reaction is the burning reaction
CH4 + 2 O2 → CO2 + 2 H2O (ΔH = −891 k J/mol,)

 
And your point is?
Look at the same for ethane, look at the ratio of CO2:H2O that you get.
And then covert moles to either a volume or a mass and compare.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
That is not what I see in Perry Chem Engg Handbook for std. net combustion heat values for methane and ethane:
C1 : 802kJ/gm mol
C2 : 1429kJ/gm mol

Values are based on product H20 in gas phase, while your value for C1 is for water in liquid phase
 
Maybe the OP is running a condensing boiler and hasn't said so . . . another case of a paucity of information being provided . . .

CR

"As iron sharpens iron, so one person sharpens another." [Proverbs 27:17, NIV]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor