Oct 1, 2014 #1 euao Mechanical Sep 30, 2014 13 ES Hi Friends I need convert an IPW in order to select a face like a plane. Any suggestion? Thanks in advance Euao
Hi Friends I need convert an IPW in order to select a face like a plane. Any suggestion? Thanks in advance Euao
Oct 2, 2014 #2 kukelyk Industrial Mar 21, 2005 315 HU I think You cannot do it with NX, but there are other CAD systems. In other case You can lay a plane on three points created 'on surface' of the facet body. ---- kukelyk Upvote 0 Downvote
I think You cannot do it with NX, but there are other CAD systems. In other case You can lay a plane on three points created 'on surface' of the facet body. ---- kukelyk
Oct 2, 2014 #3 markrief Industrial Dec 1, 2008 651 US For what do you need to select the IPW? Mark Rief NX CAM Customer Success Siemens PLM Software Upvote 0 Downvote
Oct 3, 2014 Thread starter #4 euao Mechanical Sep 30, 2014 13 ES In order to use it to create planes to build a fixture. Upvote 0 Downvote
Oct 6, 2014 #5 markrief Industrial Dec 1, 2008 651 US If you turn on "Point on Face" on the Selection Bar, you can pick points on the facet body of the IPW to define planes. Mark Rief NX CAM Customer Success Siemens PLM Software Upvote 0 Downvote
If you turn on "Point on Face" on the Selection Bar, you can pick points on the facet body of the IPW to define planes. Mark Rief NX CAM Customer Success Siemens PLM Software
Oct 8, 2014 Thread starter #6 euao Mechanical Sep 30, 2014 13 ES Thanks. Is the solution I used now. But I´d like something better. Is possible? Upvote 0 Downvote