use001
Automotive
- Oct 26, 2015
- 4
Can anyone help with ANSYS Workbench(Mechanical) 14.5 to obtain and export result from solution command line? Edit hi guys,
i'm very new with ansys. I've been given a completed calculation file on "node to node" contact gap calculation. In the soultion part, there's some command that making plots/graph for the results.
/GCOLUMN, 1, Penetration
*VPLOT,Werte_ges(1,4),Werte_ges(1,1),,,, , , , ,
/GCOLUMN, 1, Gap
*VPLOT,Werte_ges(1,4),Werte_ges(1,3),,,, , , , ,
/show,close
So i am required to change these commands so that i could get the value of each nodes into text or excel.
can anyone help me with it?
i've tried chaging the command to :
*CFOPEN,SEALING_FACE_1,txt
*VWRITE,Werte_ges(1,4),Werte_ges(1,3),,,, , , , ,
(30F10.0)
*CFCLOS
but i doesnt find any .txt files created although the calculation is completed.
Hope you guys understand what i'm trying to say and ask.
i'm very new with ansys. I've been given a completed calculation file on "node to node" contact gap calculation. In the soultion part, there's some command that making plots/graph for the results.
/GCOLUMN, 1, Penetration
*VPLOT,Werte_ges(1,4),Werte_ges(1,1),,,, , , , ,
/GCOLUMN, 1, Gap
*VPLOT,Werte_ges(1,4),Werte_ges(1,3),,,, , , , ,
/show,close
So i am required to change these commands so that i could get the value of each nodes into text or excel.
can anyone help me with it?
i've tried chaging the command to :
*CFOPEN,SEALING_FACE_1,txt
*VWRITE,Werte_ges(1,4),Werte_ges(1,3),,,, , , , ,
(30F10.0)
*CFCLOS
but i doesnt find any .txt files created although the calculation is completed.
Hope you guys understand what i'm trying to say and ask.