Can anyone identify what type of Flanges theses are please

[Chris__H]

HI everyone, I am a newbie "L Plates attached" I am wondering if anyone here can identify what type of flanges have been used here and where they might be available to purchase?(see Photo/s). I am referring to the gold coloured flanges that attach an inner fixed tube to a rotatable outer tube (So the rotating tube is sleeved on the fixed tube and connected by the end flanges) I am wondering if they might have bearings or are they steel on steel, or any other way of attachment? If any smart puppy out there knows or could provide a link to this type of part, I'd really appreciate your help.

Thanks for looking,

Chris

 

[pmover]

how about contacting the original equipment mfg? no better place to get your answer.

 

[Artisi]

your joking are you? at least show a close up of the flange - and a few dimensions might just help, like diam., number of bolts / PCD etc.

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)

 

[Chris__H]

Sorry Guys that is all I have to go on. I believe the tube is about 5mm and an estimated size of 90mm for the internal, maybe 100-130mm for the ext. tube? I saw this attachment at a fuel station on a tractor implement and thought taking some photo's would help me to find out what they are, I don't have a brand of the implement or anything.

 

[XL83NL]

HI everyone, I am a newbie "L Plates attached"

Say again, whats your name?

 

[EdStainless]

The gold colored flanges look to be brass bearings to allow rotation of the internal tube.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube

 

[gerhardl]

My first thought: this is not a normed part. My second thought is that I agree with others: no more measures, no more information.