VirgilSECARA
Mechanical
Can I make an equation betwen a part dimension and the distance betwen another 2 parts in an assambly? How?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can I make an equation betwen a part dimension and the distance betwen
- Thread starter VirgilSECARA
- Start date
- Status
Hi VirgilSECARA.
I think you can make it by this way. Within part environments check export of parameters you interest in(table of parameters-"fx").In assembly use derived part and check parameters only. Do it as many times as you have parts in equation.
In the table of parametrs (assembly) you will find part parameters and make your equation for value of certain constrain(s).
I think you can make it by this way. Within part environments check export of parameters you interest in(table of parameters-"fx").In assembly use derived part and check parameters only. Do it as many times as you have parts in equation.
In the table of parametrs (assembly) you will find part parameters and make your equation for value of certain constrain(s).
- Status
Similar threads
