Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can I print the layerlist? 3
- Thread starter HenricC
- Start date
-
1
- #2
danielhyde
Civil/Environmental
Hi,
Yes you can, there are many ways, but the way I do it is:
1)Type -layer on the command line.
2)-Choose the ? option to get a list of layers.
3)Press F2 to open the Text Window.
4)Select the layer list. Right-click and choose Copy.
5)Open a text editor such as Notepad and Paste, then print.
or open Layer and take a print screen
Yes you can, there are many ways, but the way I do it is:
1)Type -layer on the command line.
2)-Choose the ? option to get a list of layers.
3)Press F2 to open the Text Window.
4)Select the layer list. Right-click and choose Copy.
5)Open a text editor such as Notepad and Paste, then print.
or open Layer and take a print screen
-
2
- #4
Go to and see Terry Dotson's "Free Stuff" web page and look for LAYERHTM.EXE does a great job.
Tracy Lincoln, TLConsulting Consulting, Design & Training Specialist
Autodesk Discussion Group Facilitator
Discussion Group Index:
Tracy Lincoln, TLConsulting Consulting, Design & Training Specialist
Autodesk Discussion Group Facilitator
Discussion Group Index:
- Status
Similar threads
- Question