Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can plexiglas be used for replacement glass for firehose cabinets? 2
- Thread starter 2W5
- Start date
-
1
- #2
More than likely not , if the original was break glass to get into the cabinet
And if break glass is not required the building code might specify what type of material is required when in reachable area. Cannot think of the term will have to look it up
And if break glass is not required the building code might specify what type of material is required when in reachable area. Cannot think of the term will have to look it up
-
1
- #3
fireguy519345
Structural
Extinguishing cabinets have plexiglas in the doors as an option. But, because plexiglass is stronger than glass, you will need a tool to break the glass. And the tool should be tethered/wired/chained to the cabinet.
- Status
Similar threads