Cant edit part in assembly context

[czr]

Hello everyone,

having annoying problem, can't edit parts in an assembly context.
When clicking RMB on any part feature (while editing part in assembly context) got this:

instead of this:

I have this problem with only one assembly, with others it works fine.
Any ideas?

 

[cowski]

Two suggestions:
[ol 1]
[li]Make sure you are in the modeling application. If you are in something else (such as gateway), you won't be able to edit some features.[/li]
[li]Make sure the units of the component match the units of the assembly file. You won't be able to edit a component in the context of the assembly if the units don't match.[/li]
[/ol]

www.nxjournaling.com

 

[czr]

How to check out if im in gateway or something else?
Units of parts are the same as in the assembly - Milimeters (File > Properties > Displayed Part).

 

[Dave K]

It should say at the top of the NX window, what application you are in. When in doubt, go to Application, Modeling.

-Dave

NX 9, Teamcenter 10

 

[czr]

It helped, thanks a lot!