Can't insert a Design table in a part!

[kvengel]

I have SW 2008 SP 5.
I have lots of parts with design tables, and can edit them no problem.
I usually use configurations, today I tried to create a design table.
insert - design table
and nothing happens, been throught all kinds of tutorials, new parts.
again nothing...
Is there a check box in options I missed that disables this?
Thanks in advance,
Keith

 

[SnowCrash]

Do you have Excel on your computer? I don't and I have the same issue.

--
Hardie "Crashj" Johnson
SW 2010 SP 4.0
HP Pavillion Elite HPE
W7 Pro, Nvidia Quaddro FX580

 

[kvengel]

Sorry should have mentioned that,
Yes, I have office 2003 installed...
Also, when I try to create one, the options (properties) windows open just like in the tutorials.
I set my options, hit okay and nil...
Thanks
Keith

"I think the surest sign that there is intelligent life out there in the universe is that none of it has tried to contact us."- Bill Watterson (Calvin & Hobbes)"

 

[SBaugh]

Sounds like SW lost its ability to talk with Office when it comes to inserting a DT. I have been having a lot of problems with this recently, but I am still able to get it to work.

SW with the help of my VAR gave me a this command "Regsvr32.exe %Windir%\Syswow64\Ole32.dll"

You have to open a Command window - Start\Run and then you can RMB (Right Mouse Button) and paste the link and click "Enter" to run it. Its suppose to the link between SW and Excel... I am running 64-bit so if you have 32-bit machine it might differ. Check out the SW knowledge base, you should be able to find it there.

Regards,

Scott Baugh, CSWP
Berry Plastics
Cad Admin\Design Engineer
GEASWUG Greater Evansville Area SWUG Leader

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376