Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't select material spec in one-step formability analysis

Thread starter Azzza
Start date Jul 26, 2011

Status: Not open for further replies.

Jul 26, 2011

Azzza

Automotive

Hi Guys,

Trying to use different material spec in the one step formability tool but i wont let me select any. There is no materials listed in the materials window. It seems to default to the material spec in the customer defaults.

any ideas?

version 7.5.2.5

Thanks
Aaron