Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Capacitance Discharge Welding

Status
Not open for further replies.
Marc Stevenson

Marc Stevenson

Chemical
Nov 3, 2017
13
When attaching thermocouples to pressure boundary via capacitance discharge welding the energy output should be limited to 125 W-S as per ASME Sec 8 Div. 2. Why is this limitation? To what extent can it be lowered below 125 w-s?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Please do not cross post with other forums.
thread794-437611
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Maheshch
  • Locked
  • Question
Welding requirements of Centralloy G4852Micro(GX45NiCrSiNbTi35-25) and ET45Micro(GX45NiCrSiNb45-35)
Replies
0
Views
56
Maheshch
Maheshch
duongwe
  • Locked
  • Question
welding consumable select and preheat for JIS G4051 S45C weld to ASTM A572 Gr.50
Replies
0
Views
92
duongwe
duongwe
TOMMY2010
  • Locked
  • Question
Tack welding with GTAW and Final Welding with SMAW for fillet welds 3
Replies
4
Views
54
Dhurjati Sen
Dhurjati Sen
Carlos Avelar
  • Locked
  • Question
Welding reinforcement pad on pressurized pipe 1
Replies
5
Views
63
Ali Meshaikhis
Ali Meshaikhis
TOMMY2010
  • Locked
  • Question
PWHT Delay After Finishing Welding of (A387 Gr11 Cl2) Material According to B31.3
Replies
9
Views
64
0707
0707

Part and Inventory Search

Sponsor

Back
Top Bottom