Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Carbon steel tensile properties at 1200¦F? 1

Status
Not open for further replies.

Guest102023

Materials
Feb 11, 2010
1,523
Speicifically I am looking for yield strength for A36 or A516-60 at 1200°F. Required for some 'thermal straightening' calcs ... thanks in advance.
 
Replies continue below

Recommended for you

Reduction factor at 1200 deg F is around 0.3,

YS *.3

Source - Mechanical Properties of Structural Steel at Elevated Temperatures and After Cooling Down

Jyri OUTINEN and Pentti MÄKELÄINEN
Laboratory of Steel Structures,
Department of Civil and Environmental Engineering,
Helsinki University of Technology
P.O. Box 2100, FIN-02015 HUT, Finland
 
Thanks metengr - I was able to google a full copy of the paper.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor