Jun 12, 2013 #1 Thirumalai93 Mechanical May 11, 2013 6 Caster,camber and Kingpin inclination of offroad suspension with 6" bump and 4"droop?..
Jun 12, 2013 #2 Tmoose Mechanical Apr 12, 2003 5,626 30 degrees, zero and zero. http://www.robandrewsmx.com/uploads/images/full/Maico 1.jpg Upvote 0 Downvote
Jun 12, 2013 #3 GregLocock Automotive Apr 10, 2001 23,416 Front or rear? one suggestion for static settings for front suspension at design would be enough castor so it never goes negative enough camber that it never goes positive with respect to the ground KPI as little as possible but I think you need to describe the problem much better Cheers Greg Locock New here? Try reading these, they might help FAQ731-376 http://eng-tips.com/market.cfm? Upvote 0 Downvote
Front or rear? one suggestion for static settings for front suspension at design would be enough castor so it never goes negative enough camber that it never goes positive with respect to the ground KPI as little as possible but I think you need to describe the problem much better Cheers Greg Locock New here? Try reading these, they might help FAQ731-376 http://eng-tips.com/market.cfm?
Jul 1, 2013 Thread starter #4 Thirumalai93 Mechanical May 11, 2013 6 What will be the percentage of anti-dive for baja buggy vehicle? any calculations Upvote 0 Downvote
