CATIA 3d Section Fill Problem

[aleta76]

Hi, does any body knows why sometimes catia won´t fill the 3d

section in the assembly with the native colour of each part,

and instead it leaves them in a transpartent cut? For example,

this happens when the sectioning area is smaller than the

assembly... I used t think that it is beacause there is an

interference between some parts...Thanks a lot.

 

[TibiX]

Hello aleta76,

Try inverting the normal of the sectioning plane. The button is called Invert Normal. It is this button

​

Hope this helps,
Best of luck!

CATIA V5R19 – user & trainer
ANSYS – beginner

 

[aleta76]

It seems to work! Why can that be, that inverting normal makes this? Thanks a lot!