CATIA BOUNDING BOX

[TiagoFigueiredo]

I everyone,

Something really asked by CATIA Users, is Bounding box creation for parts. Many (like me), use it for BOM creation. I had an old version, but I wanted to Improve it! Know I will leave here the result of this Bounding box (help others who help me also). It works as a power copy, and remains fully parametric. if you change your model, then it will update. Give me also a feedback, if you found any bug!

If you like it, assign this post as a great post!



Tiago Figueiredo
Tooling Engineer

Youtube channel:

https://www.youtube.com/channel/UC1qdlBeJJEgMgpPLVJoOIOw

 

[AlvaroPers]

Hello Tiago,

The .CATPart is a R28 release, I guess.
Maybe, you could share the file in .stp, so those who have a prior CATIA release can test it.

Saludos.

 

[TiagoFigueiredo]

Hello, it's a 28 Release. I have built the file in R28. But if share with you an .stp file, you will only see a dead body. All the magic disappears...


Tiago Figueiredo
Tooling Engineer

Youtube channel:

https://www.youtube.com/channel/UC1qdlBeJJEgMgpPLVJoOIOw

 

[AlvaroPers]

Ok.
Maybe with a CATIA Release 20 or 21.
Gracias igual.

Saludos.

 

[LWolf]

FYI: If you have the "core & cavity design" workbench, there is a bounding box function already implemented.

regards,
LWolf

 

[TiagoFigueiredo]

For the ones, who have it!

Tiago Figueiredo
Tooling Engineer

Youtube channel:

https://www.youtube.com/channel/UC1qdlBeJJEgMgpPLVJoOIOw

 

[AlvaroPers]

Good observation. Thank you!